Loading...
Serving Daly City, CA and surrounding areas. (415) 306-5709
If previous floor coatings have peeled, bubbled, or failed in your garage or wet room, the problem is usually the moisture in your slab. We install urethane cement floors designed to stay put even in Daly City's damp coastal climate.
Urethane cement flooring in Daly City is a thick, seamless coating applied over an existing concrete slab in multiple layers that cure into a surface that feels solid, resists stains, and stays grippy even when wet. Most residential jobs take two to three days on-site plus an additional 24 to 72 hours before the space can be used normally.
Unlike many other coatings, urethane cement is mixed with water as part of its formula, which means it naturally tolerates damp environments without bubbling, peeling, or losing its grip on the slab. That makes it a reliable choice for Daly City garages, laundry rooms, and kitchens where moisture seeps up through older concrete or splashes from above. If you have had floor coatings fail in the past - especially in a wet area - this is the system designed to fix that problem for good.
If you are weighing your options, our commercial and industrial epoxy floor coatings are worth comparing for heavy-use commercial spaces where load capacity is the primary concern. For high-traffic areas that also need a polished look, our polished concrete flooring is another solid alternative.
If a previous coating is lifting in patches or forming bubbles, moisture is pushing up through the slab - a very common problem in Daly City's foggy, damp climate. Patching over the peeling areas will not fix the underlying issue. Urethane cement is designed specifically to handle this kind of moisture pressure, making it a better long-term solution than re-coating with the same product that already failed.
That dusty white crust is called efflorescence - mineral salts left behind as moisture moves up through the concrete and evaporates. It is especially common in older Daly City homes where slabs have been absorbing coastal moisture for decades. It is a clear sign that any coating applied without a moisture-tolerant system will likely fail within a year.
Bare concrete is porous, so oil drips, cleaning products, and pet accidents soak in quickly and are nearly impossible to remove completely. If you are scrubbing the same spots repeatedly, a sealed urethane cement surface solves that - spills sit on top and wipe away cleanly instead of soaking in.
If you have patched cracks before and they keep reappearing, it may be related to the minor ground movement common in the Bay Area's seismic environment. A urethane cement system applied over properly stabilized cracks can flex slightly with minor movement rather than cracking through immediately the way a rigid coating would.
Every urethane cement project starts with thorough surface preparation - we grind or shot-blast the existing concrete to open the pores, fill cracks, and create a profile the coating can grip. Then we apply the system in layers: a base coat, a broadcast layer for texture and slip resistance, and a clear topcoat seal. Each layer cures before the next one goes down, which is why the job typically takes two to three days on-site. We also include a moisture test on every project - in Daly City, that step is not optional.
For homeowners who want a different look, we also offer metallic epoxy flooring with a high-gloss decorative finish, and solid-color commercial epoxy systems for spaces with heavier demands. During the free estimate visit, we will walk you through which system fits your space, your usage, and your budget.
Ideal for Daly City homeowners whose garage or laundry room floor keeps failing coatings because of moisture moving up through an older slab.
Designed for environments where hot liquids, steam, and cleaning chemicals are a daily reality and slip resistance is non-negotiable.
Suits homeowners converting a garage into a home office, gym, or hobby room who want a floor that looks finished and feels comfortable underfoot.
Daly City is one of the foggiest cities in California, with marine moisture present nearly every month of the year. Concrete slabs in garages, basements, and ground-floor rooms here often have elevated moisture levels even when they look dry - which is the exact condition urethane cement is engineered to handle. A large share of the city's homes were also built in the 1940s through 1960s, meaning many slabs are 60 to 80 years old and more likely to have surface cracks, prior coatings, or soft areas that need extra prep time. Homeowners in South San Francisco and Brisbane face the same combination of older housing stock and coastal moisture, and we bring the same careful approach to every job across the peninsula.
The Bay Area also sits in an active seismic zone, and minor ground movement over time can cause hairline cracks to widen in older slabs. Urethane cement's built-in flexibility makes it better suited to that environment than rigid coatings - it can absorb minor movement without cracking through immediately. We address any existing cracks during prep and give you a straightforward assessment of what your specific slab needs before any coating goes down.
When you reach out, we ask a few basic questions about the size of the space and what the floor looks like now. We reply within one business day and schedule a free on-site visit - a contractor who quotes without seeing the slab is guessing, and that guess often changes on arrival.
We inspect the concrete for cracks, previous coatings, and moisture levels - in Daly City, a thorough moisture test is standard because the coastal climate means many slabs here have more moisture than they appear to. This assessment determines the prep work needed and gives you an accurate final price.
We grind or blast the concrete to open the surface, fill any cracks, then apply the base layer, texture broadcast, and topcoat seal in stages - each layer cures before the next one goes down. The whole process spans two to three days, and the crew keeps the space ventilated throughout.
After the final coat, plan for 24 hours before light foot traffic and 48 to 72 hours before heavy furniture goes back in. Before the crew leaves, walk the finished floor in good light and flag anything that does not look right - a reputable contractor addresses it before packing up.
No obligation. No sales pitch. We reply within one business day and come to you.
(415) 306-5709Daly City's coastal fog keeps concrete slabs wetter than most homeowners expect. We test every slab before applying anything and select the right primer system for the specific moisture level we find. This step is what separates a floor that lasts from one that peels within a year.
A large share of Daly City's homes were built in the 1940s through 1960s, and older concrete needs more prep time than a newer slab. We assess the slab honestly during the estimate visit and tell you upfront what we find - so there are no surprise costs once work begins.
The Bay Area sits in an active earthquake zone, and urethane cement has more flexibility than rigid coatings - it can absorb minor slab movement without cracking through. We also fill and stabilize any existing cracks during prep, giving the finished floor the best possible foundation. See standards at the American Concrete Institute.
The finished floor has a built-in texture that keeps it grippy even when wet - important for garages, laundry rooms, and kitchens. You can choose how much texture you want: lighter for a smoother feel underfoot, heavier for areas where water pools. The National Floor Safety Institute recognizes slip-resistant flooring as a key factor in preventing falls at home.
Every job we take in Daly City draws on real experience working with this city's older slabs, coastal moisture, and seismic conditions. When we give you an estimate, it reflects what the job actually requires - not the cheapest number we can put on paper to win the bid.
For surface preparation and concrete standards, see the American Concrete Institute. For permit questions, contact the Daly City Building Division.
A ground-and-sealed concrete finish that creates a low-maintenance, modern look without adding a coating layer.
Learn MoreHeavy-duty epoxy systems for warehouses, commercial kitchens, and industrial facilities with demanding load requirements.
Learn MoreWe have openings this month - reach out now and we will lock in your on-site assessment before the schedule fills up.