Loading...
Serving Daly City, CA and surrounding areas. (415) 306-5709
Your concrete floor does not have to stay stained and rough. We install metallic epoxy floors that look like polished stone, hold up to daily use, and are built to handle the Bay Area's damp coastal climate.
Metallic epoxy flooring in Daly City is a thick, poured coating applied directly over your existing concrete that contains fine metallic powder, creating a glossy one-of-a-kind finish with swirling patterns that look like polished stone or flowing water. Most jobs take two to three days on-site plus four to seven days of curing time before the floor is fully ready for vehicle traffic.
If your garage or ground-floor room has a stained, pitted, or just plain worn-out slab, metallic epoxy is one of the most effective ways to transform it. The coating bonds directly to the existing concrete and covers surface imperfections, so you get a smooth, sealed floor without tearing anything out. Many Daly City homeowners choose this option when converting garages into home offices or gyms - the floor is one of the first things people notice, and metallic epoxy makes the space feel genuinely finished.
If you are comparing options, our urethane cement flooring is worth a look too - it is a better fit for wet areas like kitchens and laundry rooms where slip resistance matters more than a glossy decorative finish.
If your garage floor has oil stains, tire marks, or a crumbling surface you have been ignoring for years, metallic epoxy bonds directly over existing concrete and covers those imperfections with a smooth, sealed finish. Waiting longer makes the underlying concrete harder to prep.
That white powder - called efflorescence - appears when moisture moves through the slab and deposits minerals on the surface. It is especially common in Daly City garages where fog keeps moisture levels elevated. It signals that any coating applied without proper prep will fail within a year or two.
Lifting edges or bubbling patches mean a previous coating has failed - usually because of moisture or rushed prep work. Painting over it will not fix the problem. A proper metallic epoxy installation starts by grinding all old material off down to clean concrete.
Many Daly City homeowners are turning garages into home offices or gyms because of the city's small lot sizes and limited room for additions. The floor is one of the first things people notice. A metallic epoxy floor makes the space feel like a real room rather than a storage area.
Every metallic epoxy project starts with serious surface preparation - diamond grinding to remove old coatings, open the concrete pores, and create a surface the epoxy can grip. We fill cracks and divots, apply a moisture-blocking primer when the slab needs it, then pour and manipulate the metallic layer to create the flowing pattern. A clear polyurethane or polyaspartic topcoat goes on last to seal the design and provide the hard, chemical-resistant surface that makes the floor last 10 to 20 years.
We also offer solid-color and multi-chip epoxy floor coatings for homeowners who prefer a more uniform look, as well as decorative broadcast systems that add texture and slip resistance. The right choice depends on how the space is used and what finish best fits your goals - we will walk you through the options during the free on-site estimate.
Ideal for homeowners who want to transform a stained or rough garage slab into a showroom-quality surface.
Perfect for Daly City homeowners converting garages into livable spaces where the floor needs to look finished.
Suits business owners who want a high-gloss, one-of-a-kind floor that draws attention and holds up under foot traffic.
Daly City sits right at the edge of the Pacific and is one of the foggiest cities in the Bay Area. That persistent coastal dampness means concrete slabs in garages and ground-floor spaces hold more moisture than slabs in drier inland cities. Before any coating goes down, we test your slab and apply a moisture-blocking primer when levels are elevated - skipping that step is the most common reason epoxy floors fail here within a year or two. Homeowners in Colma and San Francisco face the same moisture conditions and need the same careful approach.
Most homes in Daly City were built in the 1940s through 1960s, which means many garage slabs are 60 to 80 years old. Older concrete is more likely to have cracks, surface wear, or old paint that needs to be ground off before epoxy can bond. We plan for that extra prep time upfront and tell you honestly what we find - so your estimate reflects the real job, not an optimistic guess. California also has some of the strictest air quality rules in the country, and every coating we use meets the Bay Area's low-emission standards, which means faster odor clearance and cleaner air for your family during and after the work.
When you reach out, we ask a few basic questions about the size of the space and the current floor condition. We reply within one business day and schedule a free on-site visit - because a contractor who quotes without seeing the slab is guessing.
During the visit, we inspect the concrete for cracks, old coatings, and moisture - including a moisture test, which is critical in Daly City's damp climate. You can review finish samples and color options at this stage so there are no surprises on installation day.
We grind the concrete to open the pores and remove all old coatings, then fill any cracks or divots. On older Daly City slabs, this stage sometimes takes longer than expected - that extra time is what makes the finished floor last.
We apply the base coat, pour the metallic layer, manipulate the pattern, then seal with a clear protective topcoat - all in one day. The floor needs 24 hours before light foot traffic and five to seven days before parking a vehicle on it.
Free on-site estimates. No obligation. We reply within one business day.
(415) 306-5709Daly City's coastal fog keeps concrete slabs wetter than most homeowners realize. We test every slab before any coating goes down and apply a moisture-blocking primer when levels are elevated. That step is the single biggest reason our floors do not peel.
Every product we use meets the Bay Area Air Quality Management District's low-emission standards. Compliant materials cost more than non-compliant alternatives, but they clear faster, smell less, and keep your family's air quality safe during and after the job. Bay Area Air Quality Management District
We give you an itemized estimate that breaks out labor, prep, materials, and topcoat before any work starts. Bay Area quotes can feel high compared to national guides - a detailed estimate lets you compare confidently rather than just chasing the lowest number.
Most homes in Daly City were built in the 1950s and 1960s, and older concrete needs more prep time than a newer slab. We plan for that upfront and tell you honestly what we find during the assessment, so you are not hit with unexpected costs mid-project.
Every one of these commitments comes from working on Daly City's older homes long enough to know what the coastal climate and mid-century slabs actually require. We would rather tell you the honest scope upfront than win the job with a low bid and surprise you halfway through.
For additional guidance on epoxy coating products, see the American Concrete Institute. To verify a contractor's California license, visit the California Contractors State License Board.
A moisture-tolerant, slip-resistant coating built for kitchens, laundry rooms, and commercial wet areas.
Learn MoreSolid-color and broadcast epoxy systems that protect concrete in garages and commercial spaces.
Learn MoreInstallation slots fill quickly in the Bay Area - reach out today and we will schedule your on-site assessment within the week.